Handy Guide To Painting Metal Fences in Newtown, PA

2024-03-14 Paint Philadelphia Newtown PA Handy Guide To Painting Metal Fences

Handy Guide To Painting Metal Fences in Newtown, PA

Doing a fence painting project is often underestimated as a method to elevate and improve your home curb’s overall appearance and appeal – but this is an entirely wrong misconception!

Painting your fences is a great way to enhance the aesthetic appeal of your fences and your home curb, and a great form of maintenance to ensure your fences’ longevity and avoid an expensive renovation down the line.

However, there are different kinds of fences, such as wooden fences and metal fences, and each of these kinds requires a specific kind of painting method.

So, if you have metal fences at your home and are looking for a guide to help you paint them, here’s something you should read!

Here’s a Handy Guide To Painting Metal Fences.

1. Prepare Your Fences First

Before getting right into applying your fresh coat of paint, make sure that you thoroughly prepare your metal fences first.

Preparing the surface you’re going to be painting – which in this case, is your metal fences – is important to ensure that you end up with a clean, smooth, and even paint finish.

After all, your metal fences are located outside of your home, and will naturally be exposed to tons of external factors and contaminants (such as dirt and dust) that will pile up on it over time.

So, make sure to start by cleaning the fence thoroughly to remove all kinds of debris that might have accumulated on it over time.

To do this, you can use a wire brush, sandpaper, or a pressure washer – this depends on your fences’ overall condition, so assess them properly and see what cleaning method fits best.

Next, inspect the fence for any signs of rust or corrosion.

If present, use a rust converter or primer specifically designed for metal surfaces to treat these areas, to prevent the rust from bleeding on your fresh coat of paint.

2. Getting The Right Kind of Paint

Every kind of painting project entails a specific kind of paint formulation fit for the kind of surface you’re going to be painting – and your metal fences aren’t an exception to this.

So, in painting your fences, make sure that you get the right kind of paint, which is usually oil-based, provides excellent weather resistance, and has UV protection.

However, doing this all on your own can be confusing, especially with all the other varieties of paint available out there – so, in this case, don’t hesitate to consult with your local paint professional!

3. Apply Primer for Longevity

You should also remember that primer and paint go hand in hand in any painting project, so getting the right kind of primer is also crucial.

Applying a primer is a critical step in the painting process, as it creates a strong bond between the metal surface and the paint, ensuring long-lasting adhesion and protection.

So, opt for a high-quality metal primer that is specifically formulated to adhere to metal surfaces and inhibit rust formation.

To apply your primer, you may use a brush or roller, working in small sections to ensure thorough coverage.

Remember, multiple coats may be necessary for optimal coverage and rust inhibition, so be patient and thorough during this stage.

4. Paint with Precision

Once the primer has dried, it’s time to apply the paint to your metal fence.

Whether you’re using a brush, roller, or spray gun, ensure that you apply the paint evenly and smoothly, working in long, overlapping strokes to prevent drips and streaks.

Pay close attention to detail, especially around intricate areas such as railings or decorative accents.

If you’re using spray paint, maintain a consistent distance from the surface to achieve uniform coverage and avoid overspray.

Lastly, remember that it’s better to apply multiple thin coats rather than one thick coat for better adhesion and durability.

5. Finish with a Protective Sealant

To enhance the durability and weather resistance of your freshly painted metal fence, consider applying a protective sealant as a final step.

A clear topcoat or sealant designed for exterior metal surfaces can provide an additional layer of protection against UV rays, moisture, and abrasion, helping to prolong the life of your paint job.

While this may seem to merely be a step you could skip, it’s also this extra step that could guarantee you a longer-lasting coat of paint, potentially saving you from spending on a repainting project sooner than you’d expect!

 

If you need professional help with your interior/exterior painting project, PAINT Philadelphia can help.

Our home interior/exterior painting services are available in Newtown, Holland, and Richboro, PA.

Call us today at (267)682-8377 for a FREE painting estimate.

Related: Paint Colors You Should Avoid For Your Kitchen in Holland, PA

How To Repaint Damaged Surfaces On Your Home Interior in Newtown, PA

Scroll to Top